How to compare LED grow lights for an indoor herb shelf
For a Singapore kitchen with limited daylight, compare how much light reaches the herbs across the whole shelf. A lamp centred above one basil pot may leave the plants at either end in a much dimmer spot.
What to do
- Measure the shelf length and depth, then measure from the proposed lamp position to the tops of the herbs. Repeat for the height you expect before harvest. Give the supplier both distances and the footprint you want to light.
- Ask for a PPFD map at the intended mounting height. PPFD describes the rate at which plant-usable photons reach a given area. Read the figures at the corners and ends as well as the centre. Compare maps at the same distance and dimmer setting.
- Record how much daylight reaches each pot before choosing a timer programme. Ask for a schedule suited to the named herbs and that daylight contribution. Leave a dark period and adjust the lamp position as taller plants approach it.
- Use the actual input watts to compare electricity use. A 30 W fixture running 12 hours a day uses 0.36 kWh per day, or 10.8 kWh in 30 days. Multiply by your electricity rate to estimate cost. The example run time is for budgeting.
What to avoid
- A single central reading cannot establish that a long row receives even light. If a supplier gives only one number, ask where it was measured and how far the sensor was from the fixture.
- Leave room to adjust the fixture and water the pots. Check the manufacturer's clearance and moisture guidance before positioning it above a shelf that gets splashed.
A practical check
Suppose a seller shows a light map for a 60 cm square while your herb shelf is 90 cm long. The map leaves the outer 15 cm at each end unaccounted for when centred. Ask for readings at those pot positions or compare a longer fixture before committing to the layout.
University of Minnesota Extension guide to indoor plant lighting
LeaforaGet in touch