How much nitrogen is in the fertiliser on your landscaping quote?
A maintenance quote might list a kilogram of granular fertiliser, but the weight of the product tells you only part of the story. Use the nutrient analysis on the actual bag to calculate how much nitrogen the crew proposes to apply to a Singapore garden bed.
What to do
- Check how the manufacturer declares the grade. On a bag labelled by weight as nitrogen, phosphate and potash, the first number is the percentage of nitrogen. A 10-10-10 grade therefore contains 10 grams of nitrogen in every 100 grams of product. The other two figures express phosphate and potash equivalents.
- Multiply the proposed product weight by the nitrogen percentage and divide by 100. For example, 600 g of a 10% nitrogen product supplies 60 g of nitrogen. A 15% nitrogen product supplies the same 60 g in 400 g of granules. These figures illustrate a label comparison.
- Ask for the treated area and frequency as well. If the 60 g of nitrogen is distributed evenly over 30 square metres, that is 2 g of nitrogen per square metre on that visit. Four identical visits would total 8 g per square metre. Check any proposed rate against the product directions and the planting's assessed needs.
What to avoid
- Keep the units explicit. A line reading '2 g per square metre' could refer to the product or to nitrogen alone. Request both figures before comparing two contractors' schedules.
- Matching the nitrogen figure alone does not establish that the products are interchangeable. Check their other nutrients, release characteristics and labelled uses before approving a change.
A practical check
A useful quote line gives the product name and grade, grams of product per visit, bed area and number of visits. Keep a photograph of the analysis beside that line so a change of brand can be checked against the original proposal.
Virginia Cooperative Extension guide to fertiliser analysis and nutrient percentages.
LeaforaGet in touch