LeaforaGet in touch
Garden guides

Did the sprinkler repair improve coverage across the lawn?

When a contractor hands over a sprinkler repair, the average catch depth can look identical before and after the work. Ask for the individual cup readings. They let an estate manager check whether the driest parts of the zone gained water and whether a particular corner still needs attention.

What to do

  1. Request two labelled plans of the same zone, showing cup positions, depths in millimetres, test duration and weather. For a repeat test, use the same grid, duration and operating conditions. Keep zero readings from cups that were upright and empty. A tipped cup is a failed measurement and calls for a repeat.
  2. For a 12-cup test, sort the depths from smallest to largest. Average the lowest three, then divide that figure by the average of all twelve. Multiply by 100. This percentage is called lower-quarter distribution uniformity. It compares the driest quarter of the measurements with the whole zone.
  3. Put the lowest readings back on the plan. Three low cups along one kerb give the contractor a specific edge to inspect. Keep the mapped results with the repair record so the next crew can retest the same positions.

What to avoid

A practical check

Imagine twelve cups averaged 4 mm in each test. Before repair the lowest three held 1, 2 and 3 mm, averaging 2 mm. After repair they held 3 mm each. Uniformity rose from 50% to 75% with the same mean catch. Use the plan to check whether the estate's original dry corner shared in that improvement.

Landscape irrigation audit guidance hosted by Utah State University (PDF). To collect the readings, see how to test sprinkler coverage on a lawn.

Explore condominium landscaping