LeaforaGet in touch
Garden guides

Do two compost deliveries with the same nitrogen percentage supply the same amount?

Check which weight the laboratory used. A dry-basis percentage describes the solids after water is removed. An as-received percentage includes the water present when the sample was tested. For a Singapore planting job priced by the tonne, compare kilograms of total nitrogen per delivered tonne on the same moisture basis.

What to do

  1. Find the total nitrogen result, its reporting basis and the moisture percentage for the same sample. Suppose supplier A reports 2% total nitrogen on a dry basis and 60% moisture by wet weight. In a 1,000 kg load with that moisture, 400 kg is dry material. Two per cent of 400 kg gives 8 kg total nitrogen.
  2. Suppose supplier B reports 1% total nitrogen as received. At the tested moisture, a 1,000 kg load contains 10 kg total nitrogen. Supplier B's smaller printed percentage gives the larger quantity in this example. Applying another moisture adjustment to the as-received result would count the water twice.
  3. If the quote is in cubic metres, request the as-delivered bulk density in kilograms per cubic metre. For example, 2 cubic metres at a measured 500 kg per cubic metre weighs 1,000 kg. Use the density and moisture for the offered material; a wet, compacted sample can give a different weight for the same bucket volume.

What to avoid

A practical check

On the bid comparison, put the delivered quantity, its units, moisture, nitrogen reporting basis and calculated total nitrogen in adjacent columns. If a bidder gives only a bag volume and a dry-basis percentage, leave the total blank and request the missing weight and moisture information before ranking the offers.

Oregon State University Extension on compost moisture, bulk density and dry-weight nutrient analysis. For seedling test results, see reading a compost maturity report.

Explore garden landscaping