LeaforaGet in touch
Garden guides

How many hedge plants fit between a gate and a driveway?

Mark the centre of the first shrub and the centre of the last before counting plants. The distance between those marks contains the gaps in the row. Five equal gaps need six shrubs. Measuring the entire frontage without accounting for the gate opening or the space at each end can give a different quantity.

What to do

  1. Ask the installer to specify the shrub, intended clipped width and centre-to-centre spacing. The RHS explains that hedge spacing depends on plant vigour, eventual size and the hedge required. A spacing used for a worked estimate is not a planting prescription for every Singapore hedge.
  2. Mark the swing of the gate and the part of the drive that must stay clear. Set out the first and last plant centres with room for the agreed mature hedge width. Measure between the centres along the planting line. For a break such as a side gate, start a separate count on the other side.
  3. If the design specifies a maximum gap, divide the distance between end centres by that gap and round up to a whole number of gaps. Add one plant, then divide the same distance by the actual number of gaps to check the spacing. Confirm that result with the designer before ordering.

What to avoid

A practical check

Suppose a 4.2-metre bed has its first and last centres each 0.3 metre from an end. That leaves 3.6 metres between centres. With an agreed maximum spacing of 0.5 metre, 3.6 divided by 0.5 gives 7.2. Use eight gaps and nine plants, set 0.45 metre apart. Lay nine markers out before digging so the property manager can check the gate clearance.

Royal Horticultural Society guidance on hedge siting and plant spacing.

Explore garden landscaping