How much water does a garden drip system use in a week?
When comparing maintenance proposals for a Singapore garden, timer minutes alone can be misleading. A short run serving dozens of outlets can use more water than a long run serving a handful of pots. Estimate litres for each watering zone before adding up the week.
What to do
- Make one row per zone. Record the outlet count at each flow rate, minutes per run and how many runs actually occurred that week. A rain delay or a manual start changes the last number. If two zones share a controller, keep their schedules on separate rows.
- Multiply each outlet count by its flow in litres per hour, then add those products. For a planter bed with eight 2 L/h outlets and two 4 L/h outlets, the combined flow is 24 L/h. At 15 minutes per run, the bed receives about 6 litres.
- Multiply litres per run by the number of runs. Four runs give the bed 24 litres that week. A separate sheltered row with six 2 L/h outlets running for ten minutes daily adds 14 litres. The two-zone estimate is 38 litres. If rain cancels one bed cycle while the sheltered row runs as usual, revise the total to 32 litres.
What to avoid
- Label an estimate based on catalogue flow rates. If you need a closer figure, measure outlets under normal operating conditions. Record hose watering, flushing and other uses separately when comparing your estimate with a meter.
- Keep plant condition alongside the totals. Two plans can use the same weekly volume while delivering quite different amounts to a sunny planter and a shaded one. Check moisture at root depth in both before changing the controller.
A practical check
For the next maintenance review, keep the previous week's rows and change one input at a time. In the example bed, adding five minutes to each of four runs adds 8 litres per week. That gives the owner a concrete figure to discuss before approving a schedule change.
Measure the flow from your own outlets. University of California guidance on measuring discharge.
LeaforaGet in touch