Where should a privacy hedge stop beside a Singapore driveway?
A hedge that screens a patio can also hide someone approaching a driveway on foot or by bicycle. Before extending a hedge to the gate, find out which part of the entrance must stay open to view in both directions.
What to do
- Ask the managing agent or project designer for the access drawing. Find the point where the driveway crosses the walking or cycling path, then mark the area needed for drivers and path users to see each other. LTA's Active Mobility Design Guide illustrates this sight triangle in its vehicular access section.
- Draw the full-grown outline of each proposed shrub, including foliage spreading sideways from outside the triangle. For a raised bed, show the combined height of the wall and the plant above the path. A low shrub on a high planter can still block the view.
- Separate the screening run from the entrance corner in the quote. Ask for a lower planting or an open corner where visibility is needed, and keep taller screening in the section the designer confirms is suitable. Record what the entrance should look like between trims as well as immediately after pruning.
What to avoid
- Using a measurement from a neighbouring driveway as the setback for this one. The gate position, boundary, path type and approach angle can be different.
- Assuming a see-through fence solves the problem when dense foliage grows against it. Check the combined effect of plants, fencing and planters on each side.
A practical check
For a replacement hedge beside a condo exit, ask the designer to mark the last tall shrub on the plan and the maintenance team to identify the same spot on a site photo. Price those sections separately so future replacements preserve the visibility area. Keep inspections clear of moving traffic.
LTA Active Mobility Design Guide, section 2 on vehicular access and sight lines (PDF)
LeaforaGet in touch