How many grams of fertiliser does my garden bed need?
For granular fertiliser sold with a rate in grams per square metre, multiply the area you will treat by the rate on the packet. The three NPK numbers describe nutrient content. You need the separate application instructions to work out how much product to weigh.
What to do
- Find the label entry for the plants you are growing and the job you are doing. Mixing a product into a new bed and spreading it around established plants can have different instructions. Copy the rate, its units and the interval between applications.
- Measure the planted surface inside the border in metres. For a rectangular bed, multiply length by width. Split an L-shaped bed into two rectangles that do not overlap, then add their areas. Exclude paving and any sections you will leave untreated.
- As a worked example, a 2.4 m by 0.75 m planted strip covers 1.8 square metres. If your specific product calls for 20 g per square metre for that planting, one application takes 36 g. Substitute your own label rate before weighing anything.
- Set an empty container on the scale and zero it before adding the granules. For a surface application, distribute the measured amount evenly over the intended soil, keep granules off the foliage and follow the label's watering directions. Record the date and product for the next gardener.
What to avoid
- Check the units before multiplying. A liquid dilution in millilitres per litre, a rate per pot and a rate per square metre each use a different calculation.
- Check the handover record for previous slow-release applications. The date of the next maintenance visit alone tells you little about when another dose is due.
A practical check
Suppose a paved stepping area occupies 0.3 square metres inside that 1.8-square-metre strip. The treated area falls to 1.5 square metres. At the same illustrative rate, weigh 30 g. Write the treated area beside the dose so someone working on a different border can repeat the calculation.
LeaforaGet in touch