LeaforaGet in touch
Garden guides

When is newly laid turf ready for its first mow?

Before booking the first cut for a Singapore lawn, check two things on site. Have the turf pieces rooted into the soil, and is the ground firm enough to carry a mower after the last downpour? Green blades alone cannot answer either question.

What to do

  1. At a seam, gently tug one corner of a turf piece. Stop as soon as you feel resistance. If it lifts freely, lay it back in contact with the soil and allow it more time. Sample several places, including a shaded edge and a recently replaced patch.
  2. Check the ground underfoot before bringing the mower across it. If your shoe sinks into the surface or leaves a rut, postpone the cut. Note the soft patch on the handover sketch so the maintenance crew can check it again after the ground drains.
  3. Ask which grass was installed and what finished height the supplier recommends. Measure the grass before cutting and use a sharp mower blade. On the first pass, remove at most one third of the existing green blade height.
  4. For example, if the grass stands 6 cm high, taking off 2 cm leaves 4 cm. If the agreed maintenance height is lower, bring the lawn down gradually across later cuts. Use the species guidance to set the eventual height.

What to avoid

A practical check

If the front lawn passes the tug check but a low section beside the downpipe still takes a footprint, mark both on a photo. Ask the gardener whether the firm section can be reached without crossing soft ground. Record which sections received their first cut and which still need checking.

Virginia Cooperative Extension guidance on checking turf establishment and starting mowing

Explore landscape maintenance