LeaforaGet in touch
Garden guides

How many litres does your garden hose deliver in a minute?

A watering instruction in minutes only travels well between shifts if the hose delivers roughly the same flow. At a Singapore estate with several hose points, test the outlet and nozzle used on each round. A marked bucket and a phone timer are enough to convert a volume in the planting team's care plan into a watering time.

What to do

  1. Choose a bucket with a known fill line, such as 5 litres. Connect the usual hose and nozzle. Set the tap and nozzle as you would for the bed, let the flow settle, then direct the whole stream into the empty bucket. Start the timer as the stream enters and stop at the line.
  2. Multiply the litres collected by 60 and divide by the elapsed seconds. If 5 litres takes 40 seconds, the flow is 7.5 litres per minute. Empty the bucket where watering is needed and repeat. If the results differ substantially, check the nozzle setting and whether another tap was opened.
  3. Divide the intended litres by the measured litres per minute. For a bed due 15 litres under its care plan, a 7.5-litre-per-minute hose needs two minutes in total. Spread the water over the intended root zone. If water starts running onto the path, pause to let it soak in, then finish the remaining watering time.

What to avoid

A practical check

Suppose two gardeners share a courtyard round. At the next hose point the same 5-litre mark takes 60 seconds, so that hose delivers 5 litres per minute. The same 15-litre instruction now takes three minutes. Label the handover record with the outlet, nozzle setting, test volume and seconds so the next shift can reproduce the measurement.

Iowa State University Extension explains the timed-bucket method for measuring hose flow. The examples here use litres.

Explore landscape maintenance