How many metres of edging does a curved garden bed need?
A quote for new turf may give the lawn area in square metres. To price the border between that lawn and a planting bed, the installer needs the length along the proposed edge. A winding border can use more edging than its endpoints suggest.
What to do
- Walk the border and mark each place the edging starts and stops. Sketch separate runs for the bed beside the lawn and the island bed. Leave out openings and any kerb you plan to retain. Note the points that need finished ends or corners.
- Measure straight runs with a tape. For a curve, lay a rope along the proposed edging line, following each bend without cutting across it. Mark the two endpoints on the rope, straighten it without stretching it and measure between the marks.
- Ask the supplier for the installed coverage of each section after joints or overlaps. Share the individual run lengths as well as their total. Check whether cut pieces can start another run and whether connectors, end pieces and stakes are included.
What to avoid
- Measuring a curved island from one end to the other and doubling that distance. Follow the entire outline once if the island will be edged all the way around.
- Counting an opening twice. When your tape measurements already stop on each side of a stepping-stone entrance, the gap is already excluded.
A practical check
Suppose the rope measures 4.6 m on one side of a path and 3.1 m on the other. Request 7.7 installed metres across two separate runs, and identify the four end positions on your sketch. The installer can then price the fittings and explain any surplus material.
CORE Landscape Products guidance on measuring curved edging (PDF). For the grass itself, see how to measure the area for a turf quotation.
LeaforaGet in touch