Will a planter fit outside my HDB flat? How to measure the clear passage
Ask your Town Council whether potted plants are allowed at the proposed spot before ordering one. Where they are allowed, SCDF requires a continuous unobstructed escape passage at least 1.2 metres wide throughout the common corridor. Measure the narrowest point with the plant in place.
What to do
- Walk the route past the proposed planter. Identify columns, changes in corridor width and existing items opposite the spot. Keep staircases, immediate landings and access to firefighting equipment clear.
- Measure across the corridor at each pinch point. Use the actual clear gap between the nearest obstructions. A measurement taken only across the widest section outside your door can miss a narrower section a step away.
- Ask the nursery for the widest dimensions of the pot, saucer, stand and mature plant. Use a tape measure to show how far the furthest part would project. Check the remaining gap at both the pot and foliage heights.
- Record the smallest gap and where you measured it. If the proposed position falls short, choose a different location or keep the plant inside. Recheck after repotting or when a branch starts leaning into the route.
What to avoid
- A corridor meeting the width condition still needs to comply with local estate arrangements. A neighbour's planter does not establish that the Town Council permits yours.
- Keep the passage usable during watering and pruning too. Bring the watering can and trimmings back inside when finished.
A practical check
Suppose the clear width before planting is 1.55 m. A pot projecting 0.30 m leaves 1.25 m, but leaves reaching 0.42 m into that same space reduce the gap to 1.13 m. That position falls 7 cm short. Use the plant's widest reach when comparing nursery options.
LeaforaGet in touch