LeaforaGet in touch
Garden guides

How do you measure a boundary hedge for a trimming quote?

A ten-metre hedge can mean one face beside a path, two faces and a top, or several short runs separated by gates. Give each contractor the same sketch so you can compare the work included in each Singapore landscaping quote.

What to do

  1. Measure the planted length along each straight run and leave out gates or bare gaps. From accessible ground, record the current height at both ends and the top width where you can measure it comfortably. Mark any estimate as approximate and ask the contractor to verify it on site.
  2. Label each face separately: garden side, rear side, top and exposed ends. Show fences, lower ground, planting beds and any section behind a locked gate. If rear access has not been arranged, ask for the accessible work to be priced separately and leave that face pending.
  3. Describe the finish and the clearance you want. On sloping ground, specify whether the top should follow the slope or step down. For a formal hedge, avoid requesting a broad overhanging top that shades out the base. Add clipping collection and removal to the quote if you need them.

What to avoid

A practical check

For an 8 m straight hedge 1.5 m high with a 0.6 m wide top, one side and the top give about 16.8 square metres of cut surface before the ends. Adding a second equal-height face brings that to 28.8. These figures describe the scope; access, disposal and the amount of growth also affect the price.

Royal Horticultural Society guidance on assessing hedge faces, taper and sloping ground

Explore landscape maintenance