LeaforaGet in touch
Garden guides

How much turf do I need? Measure a lawn for a Singapore landscaping quote

Give each installer the same sketch and net planting area in square metres. A quotation can then show how much grass the garden will actually cover and how much extra turf the installer proposes to allow for cuts.

What to do

  1. Draw the outline and mark features that will stay exposed, such as drain covers, paving and planted beds. Measure in metres from fixed edges. If the lawn wraps around a patio, split it into rectangles and mark where one stops and the next starts.
  2. For a curved strip, mark equal short intervals along a straight baseline. At the middle of each interval, measure the planted width at right angles to the baseline. Multiply each width by the interval length and add the strip areas. Shorter intervals give a closer estimate around tight curves.
  3. Subtract features inside your measured shapes once. For four identical stepping slabs, measure one slab and multiply its area by four. If you already measured only the grass beside a path, leave that path out of the deductions.
  4. Send the sketch, dimensions and photos of awkward corners with the quotation request. Ask the supplier to state the delivered coverage per piece or roll and the extra quantity proposed for trimming. Keep the net area on the quote even if the supplier rounds up to whole units.

What to avoid

A practical check

For example, a 6 m by 4 m lawn and a separate 4 m by 1.5 m side strip total 30 square metres. Four retained slabs measuring 0.5 m by 0.5 m occupy 1 square metre inside that outline. Request a quote for 29 square metres of planted coverage, with any cutting allowance shown separately.

Clemson Extension guide to measuring lawn shapes

Explore garden landscaping