LeaforaGet in touch
Garden guides

How do you measure an uneven tree canopy for a landscaping brief?

For a preliminary plan of a Singapore garden, record two widths across the crown and mark the trunk separately. An average width helps describe the tree in a schedule. The original dimensions and their directions tell the designer which part of the garden the branches actually cover.

What to do

  1. From accessible ground, identify the two outermost crown tips that are farthest apart. Have a second person sight down from each tip and mark the points directly below. Measure the horizontal distance between the marks. Follow the actual branch tips rather than the moving edge of the tree's shadow.
  2. Turn the measurement direction through 90 degrees. Find the widest span of the same tree along that direction and record it. The two spans can cross away from the trunk. If adjacent crowns overlap and you cannot trace a branch to the tree, mark that side as uncertain.
  3. Add the two widths and divide by two for an average spread. Put both original measurements on the sketch, with a direction arrow and the trunk position. If the question concerns a particular path or bench, also mark the overhead branch edge beside that feature.

What to avoid

A practical check

An estate tree measures 12 m parallel to a walkway and 6 m across it. Its average spread is 9 m. A quotation can list the 9 m figure, but the designer locating a seat needs the marked trunk and the branch edge on the walkway side. Attach the sketch and dated photograph to the same tree identifier.

The Texas A&M Forest Service tree measurement guide illustrates the two perpendicular crown measurements. For a separate trunk record, see measuring the girth of an existing tree.

Explore garden landscaping