LeaforaGet in touch
Garden guides

Can you keep using an estate rainfall log after moving the gauge?

Keep the log, but mark the move. A gauge beside a new awning can catch a different amount from one on the lawn during the same Singapore shower. If caretakers use the log to decide which beds to check for watering, compare the two positions before removing the old gauge.

What to do

  1. Choose a position that represents the open planting. Look up for overhanging branches and roof runoff, then check the sprinkler spray pattern. Nearby walls can deflect wind-driven rain, while an exposed rooftop can also give a low catch. Mount the gauge with its opening level and photograph the view towards the nearest obstruction.
  2. Borrow a second gauge of the same design. First run them beside each other to catch an obvious difference between the instruments. Then leave one at the original spot and place the other at the proposed spot. Empty and read them at the same times across several showers. Record which gauge was where and whether irrigation ran.
  3. Read the pair as observations of a particular shower. If the old spot catches 12 mm and the new one catches 8 mm, the new reading was 4 mm lower that time. Look for a roof drip, a tilted opening or shelter on the side from which rain arrived. If the difference keeps appearing, swap the instruments to see whether it follows the location or the gauge.

What to avoid

A practical check

If the old post has already been removed, start a new location column with the installation date and a photograph. For the next watering decision, check soil in the actual beds, especially those under cover. This gives the team a usable record from the new site even without an overlap period.

US National Weather Service guidance on gauge exposure, obstructions and level openings and NWS explanation of comparing old and new observation sites. For watering decisions, see using a rain gauge alongside a soil check.

Explore landscape maintenance