Will your potted frangipani fit through the side gate?
Measure the woody crown before booking a courtyard move. A frangipani pot can pass easily between the gateposts while a fork higher up catches on a pillar. The branches of Plumeria rubra can break when struck, so plan the route with their natural shape intact.
What to do
- Photograph the plant from two sides with a measuring staff beside the pot. Record the width between the outermost woody tips in both views, the height of the widest fork above the pot base and the overall height. Leaf tips alone can give a misleading impression of where the rigid parts end.
- Walk the proposed route with the gate fully open. Measure the clear opening at pot level and again at the widest fork's travel height, allowing for the platform the mover will use. Mark door closers, projecting hinges, lights and low awnings on a photo.
- At a right-angle turn, try the outline first. Two light strips of cardboard crossed to represent the measured crown widths let you check the sweep around a corner without moving the tree. Share the tightest measurement and photos with the mover so they can confirm a route for the actual specimen.
What to avoid
- Pulling branches together to make an oversized crown fit a narrow opening. If the woody outline clashes, review a different route or discuss the options with the gardener before the move.
- Assuming a frangipani pictured in a nursery catalogue has the same shape as yours. NParks describes forms ranging from upright and compact to spreading. Use the dimensions of the particular tree being moved.
A practical check
Suppose the gate measures 1.05 m across at the pot but a light fitting reduces clearance to 90 cm at branch height. A 98 cm woody span exceeds that upper gap by 8 cm in that orientation. Test the other orientation through the full turn and send the mover both measurements before confirming access.
NParks frangipani growth forms and University of Florida fact sheet on Plumeria rubra branch structure (PDF).
LeaforaGet in touch