LeaforaGet in touch
Garden guides

How much mulch fits a ring-shaped bed around a courtyard feature?

Measure both edges of the planting ring. A contractor using only the outside diameter will include the fountain, paving or sculpture base in the material allowance. For two circular edges, subtract the area of the inner circle from the area of the outer one. Then multiply the planted area by the depth of mulch you actually need to add.

What to do

  1. Measure straight across the outside of the bed through its centre. Repeat for the base or paving inside it. Halve each diameter to get its radius. If an edge looks oval, take a second measurement at right angles before treating it as circular. Mark any access strip or inspection cover to exclude separately.
  2. For a circular ring, calculate 3.142 times the outer radius squared, then subtract 3.142 times the inner radius squared. Use metres for both radii. A bed 6 metres across around a base 4 metres across has about 15.71 square metres of planting: 3.142 times the difference between 9 and 4.
  3. Check existing mulch depth at several points. If the entire ring needs another 2 cm, multiply 15.71 square metres by 0.02 metres to get about 0.314 cubic metres, or 314 litres. Divide by the supplier's bag volume and round up at the end. If only one sector needs a top-up, measure that section separately.

What to avoid

A practical check

For the 6-metre courtyard bed, a 40-litre bag size gives eight bags for the full 2 cm top-up. If the contractor has included the central 4-metre base, the same method gives fifteen bags. Check the marked-up plan together before ordering. Both figures assume an even top-up and exclude any other hard surfaces.

University of Florida guidance on measuring circular beds and calculating mulch volume. For uneven cover, see how to measure an existing mulch layer.

Explore landscape maintenance