How should the seams look on a newly sodded lawn?
When a Singapore installer lays a lawn in continuous sheets or strips, you can often see the outline of each piece on handover day. Look at how the soil-backed edges meet. The visible outline alone tells you little about the fit.
What to do
- Start at a paved edge and look across two adjacent rows. The edges of neighbouring sheets should meet side by side. If grass leaves hide the join, ask the installer to part them so you can see whether there is exposed ground or one backing sitting on top of another.
- Follow the short ends across the rows. On a rectangular run, installers usually offset the end joints like bricks. At a bend or circular bed, look closely at the cut pieces along the curve. Each should sit flat against the soil beneath it.
- If you see a ridge, ask the installer to check its cause while the pieces can still be repositioned. An overlap calls for refitting the edges. Where two edges already meet but sit at different heights, the crew should check the backing thickness and the surface underneath.
What to avoid
- Inspect from a path where possible. Repeatedly walking across freshly laid turf to photograph each join can disturb the work.
- Check the agreed planting method before logging bare soil as a defect. Intentional spaces between plugs in open turfing are part of that planting layout.
A practical check
Make each handover note easy to find. For example, record that the second join beside the patio has a raised lip, include a close photograph from the path and ask the installer to show the same spot after refitting. Keep the after-photo with the watering and first-mow instructions.
University of Maryland Extension guidance on fitting sod pieces. See also close and open turfing in Singapore.
LeaforaGet in touch