How much water did your garden get from a Singapore shower?
A rain gauge can settle one question after a downpour: how much rain fell at that spot? Pair the reading with a soil check before deciding whether to skip a watering round, especially where the same bed runs from open sky to a sheltered walkway.
What to do
- Set a graduated rain gauge upright in the open section, clear of roof drips, sprinklers and overhanging foliage. Start with an empty gauge. After the shower, record the reading and location, then empty it for the next measurement.
- Multiply rainfall in millimetres by exposed bed area in square metres to estimate litres falling on that area. Meteorological Service Singapore explains that one millimetre of rain supplies one litre per square metre. Use the exposed footprint if a canopy covers part of the bed.
- Check moisture beneath the soil surface in both the open and sheltered sections. Look for runoff from a slope or water landing in one strip beneath a roof edge. Make a watering decision for each section based on root-zone moisture and the plants growing there.
What to avoid
- Subtracting the measured rainfall volume from a watering-can schedule litre for litre. Some rain runs off or drains beyond the roots, and the gauge measures water at one point.
- Treating a wet path as evidence that all the pots received rain. Check the pots nearest the wall and any containers tucked behind taller plants.
A practical check
If an open gauge collects 8 mm and 3 square metres of the bed had similar exposure, about 24 litres fell on that part. A further 2 square metres beneath a covered walkway need their own soil check. Record both observations so the next caretaker knows which section still needs attention.
Meteorological Service Singapore explanation of rainfall depth and volume
LeaforaGet in touch