LeaforaGet in touch
Garden guides

How to size a raised planter for seated gardening in Singapore

A raised bed can look easy to use until a wheelchair footplate meets the base or a wide rim puts the herbs out of reach. Try the planting, watering and harvesting positions with the gardener before asking for a quote.

What to do

  1. Use an existing table to represent the planting surface. Have the gardener approach it in their usual chair, from the front or side as they prefer. Place an empty pot where the nearest plant would grow. Check whether the chair arms, knees or footplates meet the edge before the gardener is comfortably in position.
  2. Move the pot back a little at a time. Ask the gardener to touch the soil and handle a leaf using a comfortable posture. Mark the furthest comfortable position with tape. Measure from the outside edge and subtract the proposed rim width to find the usable planting reach.
  3. Mark the whole planter footprint on the ground. Try approaching, turning and leaving with the other chairs and pots in their usual places. A bed against a wall needs to be tended from its open sides. If two long sides are accessible, test the reach from each to the middle.
  4. Try a watering run from tap to bed. Decide where the can rests during filling or where a hose will hang after use. Include that location and a reachable spot for hand tools on the contractor sketch.

What to avoid

A practical check

For example, if a gardener reaches 35 cm comfortably from the outside edge and the rim takes up 5 cm, the first 30 cm of soil is within that reach. On a bed with a wall behind it, a second row planted 45 cm into the soil would need a different access point. Give the contractor the actual measurements from your trial.

Further reading from NParks GardeningSG

Explore garden landscaping