LeaforaGet in touch
Garden guides

What does 30% shade net mean for a Singapore garden bed?

A net labelled 30% shade screens out roughly three tenths of the light that reaches it. About seven tenths passes through. Before buying a roll, check when direct sun actually reaches the leaves and which part of the bed needs cover.

What to do

  1. Sketch the bed at plant height in the morning, at midday and later in the afternoon. Mark where a nearby block or awning already casts a shadow. Note when the plants you want to protect are in direct sun.
  2. Check whether the specification gives percentage shade or percentage light transmission. For a product rated 70% shade, the nominal transmission is about 30%. Ask the supplier to confirm which figure is being quoted if the listing shows a percentage alone.
  3. Try a sample over a small section with room for air to move. Revisit at the hour you marked. Afternoon sun can enter from the side and miss the mesh altogether. Check the shadow at leaf level before deciding on the width and position of the cover.

What to avoid

A practical check

If the bed has sun from noon to 3 pm, photograph the test section near the end of that period as well as at noon. Give the installer both photos, the proposed mesh rating and the section to protect. A side-on photograph can show why a wider overhead cover still misses a low afternoon beam.

University of Maryland Extension explanation of shade cloth ratings and NParks guidance for newly transplanted plants.

Explore garden landscaping