LeaforaGet in touch
Garden guides

How many litres of potting mix fit a tapered round planter?

A round pot that narrows towards the base holds less than a straight cylinder of the same rim width. Use three inside measurements to estimate its capacity before buying bags for a balcony planting.

What to do

  1. Mark the intended soil line below the rim. Measure the inside diameter across that line, then the inside diameter at the floor where the mix will sit. Measure the vertical distance between the two levels. For a reservoir planter, use the top of its soil-supporting insert as the floor.
  2. With all three measurements in centimetres, call the upper diameter A, the lower diameter B and the vertical depth H. Capacity in litres equals 3.1416 times H times (A squared + A times B + B squared), divided by 12,000. This assumes circular cross-sections and a straight taper.
  3. For a pot 40 cm across at the fill line, 28 cm across at the floor and 30 cm deep, the calculation gives about 27.5 litres. Treating the entire pot as 40 cm across would give about 37.7 litres, an overestimate of roughly 10 litres.
  4. Subtract the approximate volume of the intact root ball going into the pot. Combine the new-mix requirements for the whole order before rounding up to the supplier's bag size.

What to avoid

A practical check

Suppose each of three identical 27.5-litre planters receives a root ball occupying about 8 litres. The estimated new mix is 19.5 litres per pot, or 58.5 litres overall. Three 20-litre bags cover that estimate with about 1.5 litres spare. A larger root ball or a different fill line changes the order.

Wolfram MathWorld formula for a truncated cone and soil estimates for rectangular planters.

Explore garden landscaping