LeaforaGet in touch
Garden guides

Why does one sprinkler drip after the watering cycle ends?

On a sloping condominium lawn, water left in an irrigation pipe can drain out through the lowest sprinkler after the zone shuts off. A zone valve that fails to close fully can leave the same head wet. The most useful clue for the maintenance crew is whether fresh water keeps emerging between cycles.

What to do

  1. Watch the head at the end of a normal scheduled run. Record the zone, shutdown time and whether that head sits downhill from the others. Look for fresh water emerging at the nozzle. A puddle left on paving can linger after all flow has stopped.
  2. Return before the next run and check the controller history for any intervening cycles. If the trickle faded and stopped, the observation fits drainage of water already in the line. If fresh water keeps welling up during a long idle period, ask the contractor to check whether the zone valve is passing water.
  3. Match the repair quote to the finding. For confirmed low-head drainage, a compatible sprinkler check valve can hold water in the lateral pipe. For continuous seepage through the zone valve, the contractor needs to investigate that valve. Record the head model and the height difference before agreeing on parts.

What to avoid

A practical check

After repair, check once when the zone shuts off and again during the idle period when the seepage was previously visible. Record whether new water emerged and whether the path stayed clear. This gives the estate a direct test of the repair it paid for.

Hunter Industries guidance on low-head drainage and valve leakage. If the path gets wet during the watering cycle, see how to distinguish overspray from runoff.

Explore landscape maintenance