Is a tembusu a good shade tree beside courtyard paving?
A tembusu (Cyrtophyllum fragrans) can give a sunny Singapore garden shade and fragrant flowers. The decision turns on what the courtyard can accommodate when the tree matures. NParks describes a tree reaching 30 m, with tall, flared roots called buttresses at the base of the trunk.
What to do
- Draw the proposed trunk position and measure to the nearest fixed edges in several directions. Include steps, kerbs, drains and columns. An uninterrupted bed and a small cut-out in paving can look identical on a planting list but give the designer very different constraints.
- Check what is under the bed. For a courtyard over a basement, obtain the section drawing showing the slab, available soil depth and drainage. Ask the landscape designer and building team to assess the proposed tree against those dimensions before ordering it.
- Mark where people need shade and when they use that space. Photograph the courtyard at that hour. Ask for a plan showing the expected canopy relative to seats and windows, alongside the space reserved at ground level for the trunk base.
What to avoid
- Reading the NParks figure of up to 2.5 m for buttress height as a horizontal planting distance. It describes how high those roots can rise. The site needs its own assessment of rooting space and paving clearance.
- Choosing a tree solely because the nursery specimen fits through the entrance. Delivery clearance settles one question about planting day. The layout also needs to accommodate the mature tree and people walking past it.
A practical check
For example, a trunk centred in a 1.8 m square opening has 90 cm to each paved edge. Put that measurement and the below-ground section on the same drawing. Ask whether the proposed bed can support a mature tembusu, whether a wider open bed is feasible, or whether a smaller shade tree fits the entrance better.
LeaforaGet in touch