A contractor has uncovered or cut tree roots. What should you record?
If excavation beside a Singapore garden tree exposes or tears roots, pause work in the affected area and notify the site supervisor and tree owner promptly. An arborist needs to assess the tree in its surroundings. A green crown on the day of the incident cannot establish that the tree is stable.
What to do
- Keep people away from the excavation and from any area where the tree could fall if it appears unstable. Take photographs only from a safe position. Leave the roots as found for the supervisor and arborist to inspect, and have the supervisor manage the excavation safely.
- Record when the excavation took place, what equipment was used and which side of the tree was affected. Take a wide view that includes the trunk, trench and nearest occupied space, then a closer view from safe ground. Mark the trench on the site drawing, including any earlier trenches on other sides.
- Ask the arborist to assess stability as well as tree health and to give the supervisor written directions for the affected work. Record who will carry out any treatment, when the area may reopen and what follow-up inspection is needed.
What to avoid
- Entering a trench to count roots or cutting exposed ends to make the photograph look tidier. Damaged roots and their original positions are evidence for the assessment.
- Accepting a fixed distance from the trunk or a single root diameter as proof the tree is safe. The assessment needs the whole tree, the site and the extent of disturbance.
A practical check
A useful incident note might say: Excavation along the driveway side of tree T3 revealed torn roots this morning. The marked plan shows today's trench and last month's cable route. The supervisor has isolated the area and requested an arborist inspection. Replace those example details with what was actually observed.
International Society of Arboriculture guidance on assessing trees damaged during construction
LeaforaGet in touch