LeaforaGet in touch
Garden guides

Why does a 20-minute sprinkler station now show 12 minutes?

On a Hunter X-Core irrigation controller, check Seasonal Adjustment before editing the station schedule. A setting of 60 percent turns a base run of 20 minutes into 12 minutes. The Run Times screen already shows the adjusted duration, so applying the percentage to that number again gives the wrong answer.

What to do

  1. Read the controller model and photograph the current Seasonal Adjustment percentage. Compare the displayed station minutes with the original programme in the estate's handover record. Return the dial to Run after checking.
  2. Compare a second station with a known base time. At 60 percent, a 10-minute bed should show 6 minutes while a 20-minute lawn shows 12. If the same proportion explains both readings, document the shared adjustment before anyone changes individual stations.
  3. Check whether a Solar Sync ET sensor is fitted. Hunter says it updates the adjustment daily and replaces a manual percentage at midnight. If a value changes overnight, record the readings on both sides of midnight and identify the sensor before asking a technician to investigate.

What to avoid

A practical check

A condominium handover lists 20 minutes for the lawn and 10 for a shrub border. The controller now shows 12 and 6. Photographing both screens and the 60 percent setting gives the incoming gardener a complete explanation for the displayed times. If only the border is wilting, investigate that border before changing the percentage for both.

Hunter X-Core seasonal adjustment, displayed run times and Solar Sync updates. If the issue is repeated cycles, see how to check programme start times.

Explore landscape maintenance