LeaforaGet in touch
Garden guides

Will three packs of steel edging cover a 15.6-metre garden border?

Check the installed length per pack. A steel strip's end connectors can make its loose length longer than the border it covers once joined. For example, the CORE EDGE product sheet lists 1,075 mm overall and 1,000 mm usable per strip. Five strips cover 5 metres, so three packs leave a 15.6-metre border short by 0.6 metre.

What to do

  1. Ask the Singapore installer to identify the exact product, strip count and usable length on the quote. Convert the sheet's dimensions into the metres used on your drawing. For the example above, five loose strips laid end to end measure 5.375 metres. Their published installed coverage is 5 metres.
  2. Give each separate run its own length. Ask the installer to mark where full strips, cut ends and corners will go. A leftover piece may have lost the connector needed to start the next run. Count it as reusable only after checking which end is intact and how that section will be secured.
  3. Compare the ordering units. If the example product is supplied only in five-strip packs, four packs provide 20 metres of nominal installed coverage. If individual strips are sold, ask whether one additional strip completes the run and whether the cut end requires a separate finishing piece.

What to avoid

A practical check

For one continuous 15.6-metre run, write three figures on the quote comparison: 15.6 metres required, 5 metres installed per pack and 4 whole packs if singles are unavailable. The difference between nominal purchased coverage and required coverage is 4.4 metres. Ask how much will remain as whole strips, how much becomes offcuts and who keeps the spare material.

See the CORE EDGE product drawing and usable length (PDF) and how to measure a curved garden border.

Explore garden landscaping