LeaforaGet in touch
Garden guides

Can you replace the battery in a Hunter Wireless Rain-Clik?

The battery is sealed inside the transmitter. Before ordering a part for a Singapore estate irrigation system, check whether the receiver responds to the outdoor sensor and photograph the antenna. A failed communication test calls for troubleshooting. The antenna style determines whether a replacement transmitter can work with the existing receiver.

What to do

  1. Check the model labels on the outdoor unit and the receiver beside the controller. Run the test when the sensor has dried fully after rain. Have one person watch the receiver's Sensor Status light while another operates the accessible transmitter. Record the starting colour.
  2. With a green status light, follow Hunter's communication test. Press and hold the quick-response spindle for ten seconds, repeating the hold three times. Watch for the receiver to indicate wet in red and return to dry in green after release. If the light stays green, follow Hunter's pairing procedure. If it starts red despite a fully dry sensor, Hunter directs users to re-establish pairing first.
  3. If replacement is needed, compare the antenna with Hunter's description. An older wire antenna about 10 to 13 cm long identifies a generation that needs a matching new receiver as well. For a solid-antenna Wireless Rain-Clik, Hunter lists WRCLIK-TR as the replacement transmitter. Have the installer pair it with the receiver and demonstrate the status change before closing the job.

What to avoid

A practical check

For a maintenance handover, keep one photograph of the antenna and another of the receiver label with the test results. If two suppliers quote different scopes, use those photos to check whether the installed receiver can pair with the proposed transmitter before comparing prices.

Hunter Wireless Rain-Clik battery tests and replacement compatibility. For a sprinkler that runs during a controller test, see which manual start mode tests a Hunter rain sensor.

Explore landscape maintenance